National Water Quality Management Strategy
Some of the Guideline documents listed on this page are components of the National Water Quality Management Strategy (NWQMS). The aim of the NWQMS is to achieve sustainable use of the nation’s water resources by protecting and enhancing their quality while maintaining economic and social development. The NWQMS has three major elements: policies, process and guidelines. Additional information on the NWQMS and other guideline documents can be found on the website of the Australian Government Department of Enviorment, Water, Heritage and the Arts.

Australian Drinking Water Guidelines
The Australian Drinking Water Guidelines (ADWG) are the primary reference on drinking water quality in Australia. They are designed to provide an authoritative reference on what defines safe, good quality water, how it can be achieved and how it can be assured. They are concerned both with safety from a health point of view and with aesthetic quality. The ADWG are not mandatory standards, however, they provide a basis for determining the quality of water to be supplied to consumers in all parts of Australia.

The ADWG are developed by the National Health and Medical Research Council in collaboration with the Natural Resource Management Ministerial Council. The last major revision of the Australian Drinking Water Guidelines occurred December 2004 with the incorporation of the Framework for Management of Drinking Water Quality - a preventive risk management approach for water supplies. An updated version of the ADWG was released in late 2006 with the addition of Chapter 8: Drinking Water Treatment Chemicals and 34 associated Fact Sheets.

The ADWG can be downloaded free from the NHMRC website.

A further revision of the ADWG is currently underway, and the NHMRC has issued revised sections in draft form for public comment. The comment period closed on 15 January 2010.

On 15th January 2010 WQRA lodged a submission to the NHMRC on the proposed revisions to the Australia Drinking Water Guidelines.

NHMRC also publishes a companion document entitled Water Made Clear which provides information on drinking water quality and safety for consumers. This is also available free from the NHMRC website.

To aid in the implementation of the guidelines, the NHMRC has developed a computer software program to assist local drinking water managers to develop management plans tailored specifically to their community. The Community Water Planner was released in March 2006. This tool is specifically aimed at small community water supplies and is also available from the NHMRC website.

Australian Guidelines for Water Recycling
National guidelines for water recycling have been developed by the Environment Protection and Heritage Council and the Natural Resource Management Ministerial Council. The guidelines have been developed in several components:

Australian Guidelines for Water Recycling: Managing Health and Environmental Risks (Phase 1)
The Phase 1 guidelines deal with recycling of stormwater, greywater and treated sewage for non-potable uses. They cover centralised large-scale treated sewage and grey-water recycling schemes, and on-site systems (eg apartment blocks)

Australian Guidelines for Water Recycling: Managing Health and Environmental Risks (Phase 2): Augmentation of Drinking Water Supplies
This module of the Phase 2 guidelines covers the planned use of recycled water (treated sewage and stormwater) to augment drinking water supplies. The document focuses on the source of water, initial treatment processes and blending of recycled water with drinking water sources.

Australian Guidelines for Water Recycling: Managing Health and Environmental Risks (Phase 2): Stormwater Harvesting and Reuse
This document provides guidance on managing potential public health and environmental risks associated with non-potable reuse of roofwater collected from nonresidential buildings, and urban stormwater from sewered areas, including stormwater collected from drains, waterways and wetlands.

Australian Guidelines for Water Recycling: Managing Health and Environmental Risks (Phase 2): Managed Aquifer Recharge
These guidelines focus on the protection of aquifers and the quality of recovered water in managed aquifer recharge projects. Where managed aquifer recharge is part of water recycling projects, these guidelines should be used in conjunction with the Phase 1 guidelines.

All of these documents are available from the Environment Protection and Heritage Council website. A number of supporting documents are also available.

Guidelines for Managing Risks in Recreational Water
The NHMRC has developed guidelines to protect human health from threats posed by the recreational use of coastal, estuarine and fresh waters, including both natural and artificial hazards. These guidelines cover physical and environmental factors and harmful aquatic organisms as well as water quality parameters. They are available from the NHMRC website.

Rainwater Quality
There are no formal guidelines for rainwater quality in Australia however a detailed guidance booklet "Guidance on the use of rainwater tanks" has been produced by the National Environmental Health Forum. Individual states and territories may impose treatment or management requirements where rainwater is supplied to members of the public for drinking or used in settings such as hospitals and schools.

Bottled Water Standards
The quality of bottled and packaged water is not covered by the Australian Drinking Water Guidelines, but is regulated under the Food Code by Food Standards Australia New Zealand (refer to Standard 2.6.2 Non-Alcoholic Beverages and Brewed Soft Drinks of the Food Code).